How to Make a classic anytime wreath with Bowdabra

Create a stunning DIY  classic anytime wreath! Join Nick of Nick’s Seasonal Décor to learn how to craft this versatile piece that enhances your home decor year-round.

Materials:

2-3 yards 1.5″ wide wired Farmhouse stripped ribbon

2-3 yards 1.5″ wide wired Polka Dot ribbon

Bush of Sunflowers

Bush of linear foliage

14″ round Grapevine Wreath

Bowdabra Bow Wire

Large Bowdabra

Hot Glue

Instructions:

First, cut a length of Bowdabra bow wire, making sure you cut it long enough to attach it to your wreath.  Fold it in half and place it in the Bowdabra.  This will be your slip knot. Tuck the ends under so they stay out of the way while making your bow.

Next, create a funky bow style bow. Fold lengths of ribbon in half with a loop on one side and two tails on the other, like an awareness ribbon. Then, place them in the Bowdabra alternating the sides of loops and tails.

If there is a wrong and right side of the ribbon, make sure you twist when you place it in the Bowdabra so that the wrong side is on the inside.

Make the loops about 4 1/2″ and tails about 6″.

Now scrunch everything down with the Bowdabra wand.  Then, insert the loose wires through the loop and pull tight while the bow is still in the Bowdabra. Then, remove the bow from the Bowdabra, separate the ends, turn to the back, and tie a knot.  Tie a double knot for extra security.

Dovetail all the tails of the bow. To dovetail, fold the ribbon in half and cut at an angle away from the fold. Use the excess wire to attach the bow to the wreath.

Use some hot glue to attach some white sunflowers all around. Finally, work in the greenery all around. You have the most classic anytime wreath that you made in just minutes!

Don’t forget to follow us on Facebook and be sure and subscribe to our YouTube channel, where you will find hundreds of how-to videos!