Hello, everyone! It’s Lexi from the Bowdabra Design Team, and today I’m thrilled to guide you through a charming tutorial that will help you elevate your Easter bunny ears to the next level. So, grab your supplies, and let’s dive into this creative project together!
2 – 10″ pieces of 2.5″ wide wired ribbon (per bow)
1 – Bead for each bow
Bunny ears
First, cut a piece of Bowdabra bow wire. Then, fold it in half and insert it into the Mini Bowdabra. You will have a loop on one side and two loose wires on the other side. This will serve as your slipknot. Tuck the ends under to stay out of the way while you are making your bow.
Next, take two pieces of 2 1/2″ wide ribbon 10-12 inches long and fold the ends under to hide any fraying. Place both pieces of ribbon together and place in the Mini Bowdabra from the top and scrunch down like an accordion.
Scrunch everything down with the Bowdabra wand. Thread the loose bow wires through the looped end and pull tight while the bow is still in the Bowdabra. Remove from the Bowdabra, turn to the back, and tie a knot.
Using one end of the bow wire thread it through the bead. Take the other end of the bow wire and thread it through the opposite side of the bead. Pull tight and tie a knot. Fluff and shape the bow.
To finish, use the excess wire or some hot glue to attach the bows to the Easter bunny ears. How easy it was to embellish a simple set of bunny ears and bring them to the next level!
