Hi there! I’m Lisa from The Rustic Vine, and today I’m thrilled to share a delightful Rustic Spring Welcome sign tutorial. This charming project is made entirely with Dollar Store items, making it an affordable way to bring a touch of spring into your home. Let’s get started!
Materials:
12 x 12 blank
Gingham print napkin
Floral napkin with *scalloped edge
White paint
Mod podge
Parchment paper
Sandpaper or Emory board
Peel and stick letters
Ribbon
Jute
Greenery
Iron
Heat tool or blow dryer
Instructions:
First, paint the board with vanilla color paint and let it dry. Next, separate the napkin layers. Now, spread some ModPodge on the front of the prepared board. Then, lay on the napkin layer and let it dry. Brush another layer of ModPodge on to seal it.
Now, place the second napkin piece on the board. Place a piece of parchment paper on top and iron it on. Seal again with some more ModPodge.
Next, place on some peel-and-stick letters that spell “welcome.” Seal once again with ModPodge. Add a length of jute to the back with some hot glue for the hanger.
Make the Bow:
Fold a length of Bowdabra bow wire in half and lay it in the Bowdabra. First, add the lacy ribbon in the Bowdabra making two loops on both sides. Repeat this with the gingham ribbon making the loops slightly smaller.
Using the last ribbon color place in the Bowdabra and make one loop on each side.
To finish, thread the loose wires through the loop and pull tight while the bow is still in the Bowdabra. Remove from the Bowdabra, separate the wires, turn to the back, and tie a knot.
Attach the bow to the center of the spring welcome sign and add a piece of greenery on each side. Home decor is super easy with the Bowdabra!
