Sandy Sandler, the creator of the Bowdabra shows you how to create a magical Unicorn Bermuda Bow in minutes in this quick video DIY. Follow along as she takes you through the easy steps to a beautiful Bermuda bow.
15 inches of 2.5-inch wide non-wired grosgrain ribbon
3 inches of 1-inch wide non-wired satin ribbon
Elastic ponytail holder
Hot glue or a heavy-duty adhesive dot
Fray check
First, cut a piece of Bowdabra bow wire. Then, fold it in half and insert it into the Mini Bowdabra. You will have a loop on one side and two loose wires on the other side. This will serve as your slipknot. Tuck the ends under to stay out of the way while you are making your bow.
Cut the end of your unicorn ribbon at an angle. Then, pinch a mountain fold in the center and place the piece of ribbon right side down into the Mini Bowdabra. Then, bring the other side across and scrunch in the Bowdabra.
Now using a small piece of the printed ribbon, cut the end at an angle. Then, pinch a mountain fold and place it in the Mini Bowdabra. Scrunch everything down with the Bowdabra wand.
Insert the loose wires through the loop and pull tight while the bow is still in the Bowdabra. Then, remove the bow from the Bowdabra, separate the ends, and tie. Now use the wire to tie the bow to a ponytail holder and clip the ends.
Finally, wrap the smaller ribbon all around the center of the hair bow as you glue, or use a glue dot to secure it. You have a gorgeous unicorn Bermuda bow ponytail holder.
