Bowdabra

DIY – Video How to make the most Charming Lantern Swag

 

Watch and learn as Sandy Sandler, the creator of the Bowdabra shows you how easy it is to make this charming Lantern swag. You will be surprised at how quickly you can add some extra zip to a plain lantern.

Materials:

Bowdabra® Bowmaker

Bowdabra® bow wire

Fall-themed mesh

Autumnal ribbons (featuring rose and gold tones)

Evergreens

Decorative flowers

Scissors

Instructions:

charming lantern swag

First, cut a piece of Bowdabra bow wire.  Then, fold it in half and insert it into the Bowdabra.  You will have a loop on one side and two loose wires on the other side.  This will serve as your slipknot. Tuck the ends under to stay out of the way while you are making your bow.

Next, twist and fold the mesh in the Bowdabra making four loops.

Now, lay in some florals, followed by green stems, placing in opposite directions. Then, lay in the large hydrangea flower.

Next, add the rose and gold ribbon tail. Continue with a long piece of the rose and gold ribbon twisting and folding to make loops.

Now, scrunch everything down with the Bowdabra wand.  Then, insert the loose wires through the loop and pull tight while the bow is still in the Bowdabra. Then, remove the bow from the Bowdabra, separate the ends, turn to the back, and tie a knot.  Tie a double knot for extra security. The Bowdabra wire makes it so easy!

To finish, fluff out the loops arrange the florals, and use the excess wire to tie the bow onto the lantern.

You have the most charming lantern swag and you made it in just a few minutes!

And be sure and like us on Facebook.  Each Monday at 4:00 p.m. PST, 5:00 p.m. MST, 6:00 p.m. CST, and 7:00 p.m. EST, Sandy or one of our design team hosts Facebook live.  You can follow along and they show you several quick and easy projects! Don’t forget to subscribe to our YouTube channel where you will find hundreds of video DIY’s!

Exit mobile version