How to create a Bowdabra Halloween Witch’s Wreath

Hi everyone, Steph Ackerman here with showing you how to create a Bowdabra Halloween Witch’s Wreath

Supplies:

Bowdabra Large Bow Making Tool
Bow Wire
Mesh Ribbon
Grapevine Wreath
Halloween Decorations

Instructions:

Begin by placing bow wire in the Bowdabra, placing it underneath while working on the bow.

Cut a strip of black mesh ribbon (approximately 12″ long) and place it in the Bowdabra.
This will be used as the tails of the bow for your Halloween wreath.

Continue using the black mesh, and create a 5 looped bow twisting the mesh as it passes through the channel.  Use the bow wand to push the mesh into the channel.

Using purple mesh, make another 5 looped bow on top of the black bow.
Use the bow wand again to push the mesh into the channel.
The large bow maker is tall enough to work with a large ribbon or mesh.

Pull up on the bow wire and tie off.
Arrange the loops and tie a Halloween spray to the bow
Tie the bow to the grapevine wreath using the excess bow wire.

Fluff out the loops again, arranging them in a pleasing manner on the Halloween wreath.

Thanks for stopping by.

Step

For more quick and easy DIY tutorials lvisit Bowdabra blog each week.  And be sure and like us on Facebook.  Each Monday at 4:00 p.m. PST, 5:00 p.m. MST, 6:00 p.m. CST, and 7:00 p.m. EST, Bowdabra will host  Facebook live. There is always something new to make and we take you through the easy steps.  Each week one lucky viewer will receive a special gift!