Easy DIY Fall Wreath Bow Decor Ideas – Bowdabra Pro Tips

Fall is a fun time for crafting – thanks to all the seasonal textures and colors you can bring into the mix. Not sure where to find easy DIY fall wreath bow decor ideas? Today Bowdabra is going to show easy ways to create stunning fall wreath bows out of ribbon. All these fall bows and wreaths will surely make your front door stand out this Autumn.

Watch Nick from Nick’s Seasonal Décor on Bowdabra Facebook Live, with DIY Fall funky and traditional bows and a wreath. Follow the tutorial and create DIY designer fall wreath bows. Tune in to learn the process from scratch!

DIY Funky Bow (Starts At 3:50)

Materials Required:

• 100-Yard Bowdabra Bow Wire
• Mini Bowdabra
• Maroon Ribbon Roll

 

Process:

1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
2. After cutting off the tails from the maroon ribbon roll, he places them right into the Bowdabra.
3. Using the maroon ribbon roll, he creates one loop (3”), cuts it off, and places it right into the Bowdabra.
4. In the same fashion, he creates 4 more loops on the Bowdabra.
5. He secures the bow with several wire knots in the back and finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.

 

3-2-1 Bow (Starts at 9:55)

Materials required:

• 100-yard Bowdabra bow wire
• Large Bowdabra
• Orange Plaid Ribbon Roll

 

Process:

1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
2. After cutting off the tails from the orange plaid ribbon roll, he places them right into the Bowdabra.
3. He takes the ribbon, flips it inside out, places it on the Bowdabra, and creates 3 big loops (4 ½” -5”) on either side of the Bowdabra.
4. Using the same ribbon, he creates 2 smaller loops (3”) on either side of the Bowdabra and 1 button loop.
5. He secures the bow with several wire knots in the back and finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.

 

DIY Fall Wreath (Starts At 14:59)

Materials Required:

• 100-Yard Bowdabra Bow Wire
• Large Bowdabra
• Green Burlap Ribbon Roll
• Yellow Ribbon Roll
• Hot Glue
• Grapevine Wreath
• Artificial Yellow Spike Berry Sprays, Stems, and Greenery Yellow Fillers

 

Process:

1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
2. After cutting off the long tails from the green burlap and yellow ribbon roll, he places them right into the Bowdabra.
3. Using the green burlap ribbon roll, he creates one loop, cuts it off, and places it right into the Bowdabra.
4. Using the yellow ribbon roll, he creates one loop, cuts it off, and places it right into the Bowdabra.
5. In the same fashion, he creates 4 more loops using both the ribbons alternatively.
6. He secures the bow with several wire knots in the back and finishes off by fluffing the loops and cutting the dovetail pattern on the tail ends.
7. In the end, he sticks the bow securely to the wreath and adds some decorative picks such as artificial yellow spike berry sprays, stems, and greenery yellow fillers with hot glue.

 

DIY Traditional Bow (Starts At 29:05)

Materials Required:

• 100-Yard Bowdabra Bow Wire
• Mini Bowdabra
• Gold Leaves Printed Sheer Ribbon Roll

 

Process:

1. Nick folds the bow wire in half and tucks it underneath the Bowdabra.
2. After cutting off the tails from the gold leaves printed sheer ribbon roll, he places them right into the Bowdabra.
3. He takes the ribbon, flips it inside out, places it on the Bowdabra, and creates 7 loops.
4. Next, he pulls the bow wire from one end to the other and ties the bow.
5. He finishes off by fluffing all the loops.

 

 

Please join us on Mondays at 4:00 p.m. PST, 5:00 p.m. MST, 6:00 p.m. CST, and 7:00 p.m. EST each week for another fun Facebook live.

Did you miss any Facebook lives? You can find DIY decor bows and more at the Bowdabra blog!