Bowdabra

Handmade Jewelry: Ribbon Pendant

Design an elegant ribbon pendant using a strand of 3/8″ satin ribbon and silver Bowdabra Bow Wire. Follow our simple tutorial instructions below to create this ribbon pendant. Bowdabra Bow Wire is malleable and easy to work with and adds a beautiful sparkling rich look.

Materials Needed:

Instructions:

1. Begin with 14″ of 3/8″ satin ribbon and 18″ of silver Bowdabra Bow Wire.

Ribbon Pendant

 

2. Fold the Bowdabra Bow Wire in half to make a loop.

Ribbon Pendant

 

3. Fold the 3/8″ satin ribbon in half to create a crease. At the crease mark place the ribbon at the back of the Bowdabra Bow Wire loop. Fold the ribbon over each other.

Ribbon Pendant

 

4. Take the Bowdabra Bow Wire ends and thread them through the Bowdabra Bow Wire loop and ribbon loop.

Ribbon Pendant

 

5. Pull the Bowdabra Bow Wire tails and the ribbon left to right – pull tight.

Ribbon Pendant

 

6. Fold the ribbon across the Bowdabra Bow Wire (looks like little arms).

Ribbon Pendant

 

7. Thread each Bowdabra Bow Wire end through each loop (looks like little legs).

Ribbon Pendant

 

8. Pull Bowdabra Bow Wire tightly and ribbon tightly left to right.

Ribbon Pendant

 

9. Make the ribbon “arms”.

Ribbon Pendant

 

10. Pull the Bowdabra Bow Wire “legs” through each loop.

Ribbon Pendant

 

11. Pull the Bowdabra Bow Wire tightly and ribbon.

Ribbon Pendant

 

12. Make several ribbon loops.

Ribbon Pendant

 

13. Tie the Bowdabra Bow Wire around the ribbon tails. Hold the wire in place with hot glue. Cut the ribbon and dovetail the ends. Seal the ends with a lighter.

 

Ribbon Pendant

 

14. Thread a bead onto the loop. Hold it in place with a small dab of glue.

Ribbon Pendant

 

15. Your pendant is complete.

Ribbon Pendant

 

For more about your designer click here…

Exit mobile version