Looking to spruce up your home for the upcoming Irish holiday, better known as St. Patrick’s Day? Make this simple fabric wreath for St. patrick’s day in 30 minutes to add a touch a green to your every day décor.
Supplies:
Instructions:
1.Gather all of your supplies to create the wreath.
2. Using your sewing machine begin sewing a pleated ruffle.
3. Place the pleated ruffle pattern size down and place the MDF wreath on top.
4. Begin applying hot glue to the back of the MDF wreath.
5. Carefully wrap one side of the fabric around the MDF wreath.
6. Follow the step above and repeat by wrapping the other side of the fabric around the wreath.
7. Repeat the last 6 steps above for the second piece of fabric.
8. This is how your wreath will look once it is completely wrapped.
9. Gather your St. Patrick’s Day Wire Garland.
10. Begin unwinding the wire garland and hot gluing it to the outside of the wreath.
11. Wrap two to three layers of wire garland around the outside of the fabric wreath.
12. Wrap the wire garland around the inside of the wreath securing it with hot glue every few inches.
13. Begin by gathering all the materials you will need for this project. Cut ribbon and seal each end of the ribbon with clear nail polish. The nail polish dries quickly so there is no need to wait for it to dry.
14. Place Bowdabra ® Hair Bow Tool and Ruler onto the Mini Bowdabra, leaving a space at the bottom for the Mini Bowdabra tower to move. Cut an 18”piece of Bowdabra Bow Wire and fold it in half. Lay it into the Mini Bowdabra. You’ll have a loop at one end and two loose pieces at the opposite end.
15. Place a piece of the ribbon in the Mini Bowdabra.
16. Fold the ribbon over and press into the Mini Bowdabra. This is the beginning of your first loop. *This bow was made 3 inches long on each side.
17. Fold the ribbon to make a loop.
18. Repeat, folding the ribbon again to make another loop.
19. Repeat one more time so that you’ll have four loops created.
20. Next, create a mini loop that will be seen at the middle of the bow.
21. Scrunch down the ribbon with the Mini Bowdabra wand.
22. While the bow is still in the Mini Bowdabra, thread the two loose ends of the Bowdabra bow wire through the loop at the other end.
23. Pull the bow wire tightly while the bow is still in the Mini Bowdabra.
24. Gently pull the bow out of the Mini Bowdabra. Separate the two loose ends of the bow wire and bring them around to the back of the bow. To tie off the bow, pinch the bow wire securely against the bow.
25. Fluff and shape the bow.
26. Attach the ribbon to the wreath, and cut the remaining Bowdabra Bow Wire. Display your wreath so everyone can admire it!
